Cree Commercial Led High Bay Lighting AC 90 - 305 V LED Warehouse
Light PF > 0.98
Features of 150w led high bay light
5.For indoor and wet location.
1, The light source adopts the integration of imported single high
power LED, with the special design of integrating many chips into
one lighting source.
2, Integrative design for heat sink and housing ensure 50,000 hours
life-span for the LED. If it works 11-12 hours per day, it can work
over 10 years.
3, The high purity aluminum from Germany as the reflector is at
high reflecting efficiency, which improves the efficiency of light
uniformity and utilization, and shows the LED advantage of energy
4, Wide range of input voltage: AC85-265V. New high efficiency
constant current driver.
5, Can present the original color of the objects, it has varies of
colors to choose which can meet the requirements in different
environments. It eliminates the dullness of environments caused by
the lower color temperature, like sodium lamp, or higher color
temperature, like mercury lamp.
6, No delay start. It can reach normal lighting as soon as it is
turned on. No noise.
7, Use powerful LED light source and high efficiency imported LED
driver. Compare with sodium lights, it can save electricity around
8, Environment friendly and no air pollution. We exert the design
of using cold light source. It no heat radiation. There is no ill
to our eyes and skin. The floodlights do not have lead, hydrargyrum
and any other contamination. It is really environment friendly with
9,Beam Angle: both 120 and 80are available.
1. Instead of the fluorescent lights indoors
2. School / Universities / Hospital
3. Conference / Meeting room , Show Room
4. commercial establishments
5. Factories / Offices
7. Residential / Institution buildings
8. Government lighting engineering, airport, subway
Specification of 150W LED High Bay Light:
|Total Harmonic Distortion||less than 9%|
|Power Efficiency||> 86%|
|LED Working Voltage||30-36V DC|
|LED Initial Flux|
Height: 4M 1511.5LUX
Height: 6M 678.3LUX
Height: 8M 416.7LUX
Height: 4M / Ø7.05m
Height: 6M / Ø10.37m
Height: 8M / Ø13.69m
|Color Rendering Index|
|Light Distribution||Symmetry / Light spot (round)|
|Light Design||LED+reflector secondly light distribution|
|Juction Temperature||less than 80°c|
|Operation Temperature||-40°c to +55°c|
|Storage Temperature||-25°c to +65°c (26°c is best-fit)|
|Working Life Span||50,000Hours|
|Power Line||0.75mm² three-core cable|
Installation of 150W LED High Bay Light
1. The lamp body power leads through the silicone ring hook, then
hook screwed into the lamp body
2. Mounting lamp shade
3. The accessory hook fixed on the roof, hanging on a hook on one
end of the chain, the other end will be led mining lamp lifted;
4 Connect the power cord led mining lamp, when red is positive,
blue is negative, yellow unacceptable.